 |
"Web Guiding"and "Web Expanding" are essential
for processing web materials. Toyo Machinery has served in this field for over
70 years.

|
| |
製品情報 |
| |
 |



PCP-15A
| DC motor |
| System |
Ward-Leonard type reversible thyristor control of DC servo motor. |
| Control |
Speed control with motor current reversing function without circulating current. |
| Main Circuit |
Anti-parallel connected thyristor center-tapped, full-wave control. |
| Braking |
Regenerative braking. |
| Speed Sensor |
From counter electromotive force of armature, with IR-drop compensation. |
| Control Input |
P. |
±10VDC (20kΩ input impedance) |
| ON-OFF |
Contact closure signals (15VDC,10mA) |
| Rated Output |
100W |
| Power Source |
200/220V AC ±10% 50/60Hz Single phase 1kVA or more (Other voltage can be available on request.) |
| Protection |
Overload protection, low voltage protection, short-circuit protection. |
| Alarm Output |
・Photo relay output during protective circuit operation. ・Photo relay output for limit circuit operation.
|
| Applicable Motor |
Model DMM-10(100W), Model DCM-12(80W), Model DCM-15(60W) |
| Applicable Sensor |
Proportion |
Model RPD series, Model PTD series, Model RFD series Model PCD series, Model PFD series, proportion sensor other than above. |
| ON-OFF |
Model FB series, Model PS-30, ON-OFF sensor (open emitter type) other than above. |
| Other functions |
・Emergency stop output relay ・Automatic return-to-center control ・Line control input terminal for automatic operation in unison with the line ・On-delay timer (0 to 10 seconds) for line control
|
| Ambient Temperature |
0 to 45°C |
| Ambient Humidity |
35 to 85%RH (non-condensing) |
| Mass |
Approx. 18kg |
| Painting Color |
Munsell N4.0 |
| Accessories |
Glass-tube fuse: 1A/125V x 1 |
PCP-45A
| DC motor |
| System |
Ward-Leonard type reversible thyristor control of DC servo motor. |
| Control |
Speed control with motor current reversing function without circulating current. |
| Main Circuit |
Anti-parallel connected thyristor center-tapped, full-wave control. |
| Braking |
Regenerative braking. |
| Speed Sensor |
From counter electromotive force of armature, with IR-drop compensation. |
| Control Input |
P. |
±10VDC (20kΩ input impedance) |
| ON-OFF |
Contact closure signals (15VDC,10mA) |
| Rated Output |
400W |
| Power Source |
200/220V AC ±10% 50/60Hz Single phase 1kVA(DM-30:1.5kVA) or more (Other voltage can be available on request.) |
| Protection |
Overload protection, low voltage protection, surge protection, short-circuit protection, and electrical isolation between main and control circuits. |
| Alarm Output |
・Photo relay output during protective circuit operation. ・Photo relay output for limit circuit operation. |
| Applicable Motor |
Model DM-30 (350W), Model DMM-20 (200W), Model DMG-20 (200W) |
| Applicable Sensor |
Proportion |
Model RPD series, Model PTD series, Model RFD series Model PCD series, Model PFD series, proportion sensor other than above. |
| ON-OFF |
Model FB series, Model PS-30, ON-OFF sensor (open emitter type) other than above. |
| Other functions |
・Emergency stop output relay ・Automatic return-to-center control ・Line control input terminal for automatic operation in unison with the line ・On-delay timer (0 to 10 seconds) for line control |
| Ambient Temperature |
0 to 45°C |
| Ambient Humidity |
35 to 85%RH (non-condensing) |
| Mass |
Approx. 15kg |
| Painting Color |
Munsell N4.0 |
| Accessories |
Plug fuse: BLAO15D(15A) Fuji Electric x 1 Glass-tube fuse: 0.5A/250V x 1 |
|
|
| |
|
| |
|